Skip to product information
OUT® PRO Rust Stain Remover Spray

Out® Pro

OUT® PRO Rust Stain Remover Spray

Dealer Exclusive

SKU:  OPRS12N
SKU:  OPRS12N
Size32 oz

Concentrated Rust Removal for Vertical and Hard-to-Reach Surfaces

  • Clings to vertical and hard-to-reach surfaces without immediately dripping or running
  • Dissolves rust stains on contact with no scrubbing required
  • Targets localized stains on compatible tubs, sinks, showers, tile, and toilet surfaces above the water line
  • Removes lime and calcium buildup from compatible surfaces
  • Made in the USA
dealer locator

Targeted Rust Stain Removal

OUT® PRO Rust Stain Remover Spray gives facility teams, cleaning contractors and property-maintenance crews a focused solution for localized rust stains. The concentrated gel clings to compatible vertical surfaces without immediately dripping or running, keeping the formula on the area being treated.

Use on compatible tubs, sinks, showers, tile and toilet surfaces above the water line. The targeted spray format helps reach corners, edges and tight fixture areas, while the formula also removes lime and calcium buildup.

Remove Rust Without Scrubbing

Spray, wait a few seconds, wipe, and rinse. Because the formula dissolves rust stains without scrubbing, maintenance and cleaning crews can correct visible staining without adding a separate abrasive-cleaning step.

WHY PROFESSIONALS RELY ON OUT® PRO RUST STAIN REMOVER SPRAY

 Rust Stain Remover Spray

CLINGING GEL - Stays on vertical surfaces instead of immediately dripping or running.

NO SCRUBBING REQUIRED - Dissolves rust stains on contact before wiping and rinsing.

FAST CONTACT TIME - Treats rust stains in a few seconds for efficient spot cleaning.

TARGETED SPRAY - Directs the formula onto corners, edges, and other hard-to-reach areas. 

MULTI-MINERAL ACTION - Also removes lime and calcium buildup on compatible surfaces.

MADE IN THE USA - Manufactured in the United States.

Keep Rust Stains From Overshadowing Your Clean

OUT® PRO Rust Stain Remover Spray gives facility teams and cleaning contractors a focused solution for compatible tubs, sinks, showers, tile, and toilet surfaces above the water line. It is well suited to restroom maintenance, property turnovers, and service calls where visible rust stains can undermine an otherwise clean result.

Targeted Rust Stain Removal

OUT® PRO Rust Stain Remover Spray gives facility teams, cleaning contractors and property-maintenance crews a focused solution for localized rust stains. The concentrated gel clings to compatible vertical surfaces without immediately dripping or running, keeping the formula on the area being treated.

Use on compatible tubs, sinks, showers, tile and toilet surfaces above the water line. The targeted spray format helps reach corners, edges and tight fixture areas, while the formula also removes lime and calcium buildup.

Remove Rust Without Scrubbing

Spray, wait a few seconds, wipe, and rinse. Because the formula dissolves rust stains without scrubbing, maintenance and cleaning crews can correct visible staining without adding a separate abrasive-cleaning step.

Why Professionals Rely on OUT® PRO Rust Stain Remover Spray

CLINGING GEL - Stays on vertical surfaces instead of immediately dripping or running.

NO SCRUBBING REQUIRED - Dissolves rust stains on contact before wiping and rinsing.

FAST CONTACT TIME - Treats rust stains in a few seconds for efficient spot cleaning.

TARGETED SPRAY - Directs the formula onto corners, edges, and other hard-to-reach areas. 

MULTI-MINERAL ACTION - Also removes lime and calcium buildup on compatible surfaces.

MADE IN THE USA - Manufactured in the United States.

Keep Rust Stains From Overshadowing Your Clean

OUT® PRO Rust Stain Remover Spray gives facility teams and cleaning contractors a focused solution for compatible tubs, sinks, showers, tile, and toilet surfaces above the water line. It is well suited to restroom maintenance, property turnovers, and service calls where visible rust stains can undermine an otherwise clean result.

DIRECTIONS FOR USE

Before use: Always pretest in an inconspicuous area. Work in small areas, starting at the bottom and moving upward.

  1. Spray directly on the rust stain.
  2. Let the product stand for a few seconds, then wipe with a damp sponge or cloth.
  3. Rinse promptly and thoroughly. Repeat if necessary.

For stubborn stains, increase the dosage and/or contact time without exceeding 30 seconds. Rinse and reapply if needed. Wipe up spills immediately.

Surface and Application Limitations

Do not use in water-treatment equipment. May damage natural marble, terrazzo, granite, colored grout, brick, stone with iron oxide pigments, and metal surfaces. May etch some older or worn porcelain tubs and sinks or ceramic tile. Avoid contact with wood, painted surfaces, and wallpaper. Always test a hidden area first.

Professional Safety Note

DANGER: Can cause skin and eye damage. Do not breathe vapors. Wear skin, eye and face protection. Use with adequate ventilation, wash thoroughly after handling, keep locked up and out of reach of children, and do not mix with other chemicals. Follow the final product label and SDS for complete safety guidance.

SKU Detail

SKU
OPRS12N
Size 32 oz
Item UPC 8-18125-00008-5
Item Length 2.5 in
Item Width 4.63 in
Item Height 11.12 in
Case Pack 12
Case UPC 108-18125-00008-2
Case Length 11.5 in
Case Width 14.31 in
Case Height 11.81 in

Customer Reviews

Reviews are viewed and verified before publication. Reviews marked with “Verified Buyer” were submitted by customers who purchased the item from our online shop.

Frequently Asked Questions

OUT PRO® Rust Stain Remover Spray removes rust stains from compatible surfaces. Its clinging gel is especially useful on vertical and hard-to-reach areas where liquid formulas can run off.
The formula removes rust stains as well as lime and calcium buildup on compatible surfaces. Always pretest an inconspicuous area and follow the surface limitations on the label.
The gel holds to upright surfaces instead of immediately dripping or running. This helps place the formula directly on localized rust stains on shower walls, tub surrounds, toilet bowls above the water line, and other approved vertical areas.
No. Spray the rust stain, let the product stand for a few seconds, wipe with a damp sponge or cloth, and rinse promptly and thoroughly. Repeat the treatment if necessary.
Let the product stand for a few seconds, but do not exceed 30 seconds. For a persistent stain, rinse the surface and reapply.
Use the spray on rust stains above the water line and other vertical or hard-to-reach toilet-bowl areas. For heavy-duty stains below the water line, use a rust remover specifically labeled for that application.
Do not use it on natural marble, terrazzo, granite, colored grout, brick, stone containing iron oxide pigments, wood, painted surfaces, or wallpaper. The directions also warn of possible damage to metal and possible etching of older or worn porcelain tubs, sinks, and ceramic tile. Always pretest a hidden area.
No. The spray is not intended for water-treatment equipment. Use a product specifically labeled for cleaning water softeners or related equipment.
FAQ image

Related Products