Sani-System® Clean & Sanitize Kit

Sani-System®

Sani-System® Clean & Sanitize Kit

SKU: SSCS48

Convenient, Complete Water Softener Care

Combines the industry's only EPA-registered and NSF-approved sanitizer with Res Care resin cleaner
Convenient single doses eliminate guesswork
Easy service add-on
Each kit contains Sani-System 0.5 oz. packet and Res Care 4 oz. bottle

dealer locator

Complete Softener Care—In One Simple Step

The Sani-System Clean & Sanitize Kit gives you everything you need to clean and sanitize a water softener during a standard service call. With pre-measured doses of both sanitizer and resin cleaner, it eliminates guesswork and ensures consistent, professional results every time.

Turn Every Service Call into a Higher-Value Visit

This convenient add-on helps you go beyond basic maintenance—addressing both contamination and resin performance in one step while increasing customer confidence and service revenue.

WHY CONTRACTORS RELY ON SANI-SYSTEM KITS

COMPLETE CLEAN + SANITIZE SOLUTION - Combines Sani-System sanitizer and Res Care resin cleaner for total system treatment

PRE-MEASURED FOR CONSISTENCY - Single-dose format eliminates measuring errors and ensures proper application every time

EASY SERVICE ADD-ON - Quickly integrates into standard service calls with minimal added time

IMPROVES SYSTEM PERFORMANCE + HYGIENE - Cleans resin beds while addressing potential bacterial contamination

TRUSTED + CERTIFIED COMPONENTS - Includes EPA-registered Sani-System sanitizer and NSF-certified Res Care cleaner

DRIVES CUSTOMER CONFIDENCE - Provides a more complete service that customers can see—and trust

Build A More Professional Service Offering

The Sani-System Kit helps standardize your service process—delivering consistent results while creating an easy opportunity to increase ticket value on every visit.

Add Sani-System Kits to every service call to deliver complete system care—clean, sanitize, and protect in one step.

Complete Softener Care, Made Simple

The Sani-System® Clean & Sanitize Kit gives homeowners a simple way to support a cleaner, better-maintained water softener using the same professional-grade products trusted by water treatment contractors. Each kit includes pre-measured doses of Sani-System sanitizer and Res Care® resin cleaner, making it easier to clean and sanitize your system with confidence.

Clean the Resin. Sanitize the System.

Over time, water softeners can collect buildup inside the resin bed, and like any water treatment equipment, they may also benefit from periodic sanitizing. It’s also a good idea to sanitize your water softener after the system has been opened for service, following a boil water advisory, or any time you’re concerned about possible contamination.

This kit helps address both needs in one convenient treatment—supporting system cleanliness, resin performance, and better ongoing maintenance.

WHY HOMEOWNERS CHOOSE THE SANI-SYSTEM® CLEAN & SANITIZE KIT

COMPLETE CLEAN + SANITIZE SOLUTION
Combines Sani-System sanitizer and Res Care resin cleaner to help clean the resin bed and sanitize the softener system.

PROFESSIONAL-GRADE PRODUCTS
Uses products trusted by contractors for routine water softener care and service maintenance.

PRE-MEASURED FOR EASY USE
Single-dose packets help remove the guesswork, so you can apply the right amount every time.

HELPS SUPPORT SOFTENER PERFORMANCE
Res Care helps clean the resin bed, which can improve system efficiency and help your softener continue working as intended.

HELPS MAINTAIN SYSTEM HYGIENE
Sani-System sanitizer helps address potential bacterial contamination inside the softener system.

TRUSTED + CERTIFIED COMPONENTS
Includes EPA-registered Sani-System sanitizer and NSF-certified Res Care cleaner.

A Smarter Way to Care for Your Water Softener

The Sani-System Clean & Sanitize Kit makes softener maintenance easier by combining two important care steps in one convenient kit. Use it as part of your regular maintenance routine, or ask your water treatment professional to include it during your next service visit.

Keep your water softener cleaner, fresher, and better maintained with professional-grade care trusted by contractors.

RES CARE® DIRECTIONS FOR USE (Read Entire Product Label Before Using):

FIRST APPLICATION FOR A FOULED UNIT

Use 4 oz. (1/2 cup) of Res Care per cubic foot of softener resin. Note: Most residential softeners contain approximately 1 cubic foot of resin. If unsure, check your owner’s manual. Pour Res Care directly into the brine well. If your softener has no brine well, pour Res Care directly into the salt tank when the salt is low. Manually regenerate the softener. NOTE: If taste or odor is detected in tap water, manually regenerate softener, then run cold water until odor is gone.

REGULAR/MAINTENANCE USE

Add 4 oz. (1/2 cup) per cubic foot of resin at each regeneration.

SANI-SYSTEM® DIRECTIONS FOR USE (Read Entire Product Label Before Using):

WATER SOFTENERS

Sanitization is to occur after initial installation, after the system is serviced and periodically during its use.
1. Backwash the softener and add one 0.25 ounce pre-measured packet per 2 gallons of water to the brine tank well. (NOTE: standard system capacity is 48 gallons.) 2. Proceed with the normal regeneration or interrupt the cycle after the brining step and let the softener soak for a minimum of 60 seconds. 3. Backwash the softener with potable water to make sure all sanitizing solution is thoroughly rinsed from the unit before returning it to service.

REVERSE OSMOSIS (RO) UNITS

Sanitization is to occur after initial installation, after the system is serviced and periodically during its use.
1. Turn off RO system, drain storage tank and remove membrane element and pre-filters. Put membrane element in a plastic bag so it remains wet. 2. Fill empty pre-filter housing with one 0.25 ounce pre-measured packet per 2 gallons of water and turn on raw water. (NOTE: standard system capacity is 1-2 gallons.) 3. After holding tank is full, let system stand idle for a minimum of 60 seconds. Turn off water. Drain holding tank. 4. Before the system is put back into service, flush system with potable water to assure sanitizing solution is rinsed thoroughly from system. Follow the manufacturer’s directions for re-installation of new pre-filters, membrane element and post filter.

WATER COOLERS, WATER HOLDING TANKS AND PRESSURE TANKS

Sanitization is to occur after initial installation, after the system is serviced and periodically during its use.
1. Shut off incoming water line. 2. Pour contents of one 0.25 ounce pre-measured packet per 2 gallons of water. Keep packets in box until ready to use. 3. Apply or circulate (if possible) to wet all surfaces and allow a minimum contact of 60 seconds. 4. Drain and completely flush system twice with potable water. 5. Return to service by opening incoming water lines.

Product Resources

Clean & Sanitize Kit Sell Sheet

Sanitize Your Water Softenerin 60 Seconds-No Bleach Needed

Resource: SDS Sheet English

Resource: SDS Sheet French

SKU Detail

SKU	SSCS48	SSCSDISPLAY
Size	48 ct.	8 ct. Display
Item UPC	8-18125-00118-1	8-18125-00118-1
Item Length	4.5 in
Item Width	5.31 in
Item Height	1.75 in
Item Weight	0.43 lb	0.5 lb
Case Pack	48	8
Case UPC	10818125003403
Case Length	18.25 in	9.25 in
Case Width	14.25 in	5.88 in
Case Height	6.38 in	6.25 in
Case Weight	22 lb	3.95 lb
Cases/Pallet	48	140

Customer Reviews

Reviews are viewed and verified before publication. Reviews marked with “Verified Buyer” were submitted by customers who purchased the item from our online shop.